Page 1
USER MANUAL Edition: 2 from 24.01.2022 Supersedes edition: 1 from 24.09.2020 SWB-60 Buffer power supply system for PoE switches, 52VDC/7Ah/60W...
1.1. General description. Buffer power supply system for PoE switches. SWB-60 is designed for uninterrupted power supply of PoE switches with 52 V DC. It was designed based on switching power supply module with built-up DC / DC converter with high energy efficiency, placed in metal enclosure (color RAL 9003).
SWB series 1.3. Description of PSU components and connectors. Table 1. View of PSU (see Fig. 3). Element no. Description Mounting holes Screws for locking mounting plate Cable bushing TAMPER; microswitch of antisabotage protection (NC) Switch power cable terminated with a DC 2.1/5.5 plug BAT +, BAT - battery output + BAT red, - BAT black –...
SWB series 2. Installation. 2.1 Requirements. Device is to be mounted by a qualified installer, holding relevant permits and licenses (applicable and required for a given country) for ~230 V in and low-voltage installations. The unit should be mounted in confined spaces, in accordance with the II environmental class, with normal relative humidity (RH=90% maximum, without condensing) and temperature from -10°C to +40°C.
CAUTION! Power supply module unit is adapted for a sealed lead-acid battery (SLA). After operation period it must not be disposed of but recycled according to applicable law. Pulsar sp. j. Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 e-mail: biuro@pulsar.pl,...
Need help?
Do you have a question about the SWB-60 and is the answer not in the manual?
Questions and answers