Overlays - Axis Q6054 Mk III Manual

AXIS Q6054 Mk III PTZ Network Camera
Additional settings
Go to Settings > Stream > General
•
Go to Live view settings > Video format
•
Go to Settings > Stream > H.264 encoding
•
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between
the darkest and the brightest areas can be significant. The result is often an image where either the
dark or the bright areas are visible. Wide dynamic range (WDR) makes both dark and bright areas of
the image visible.
注
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Settings > Image > Wide dynamic
2. Turn on WDR.
3. If you still have problems, go to
of interest.
Find out more about WDR and how to use it at
Stabilize a shaky image with Electronic Image Stabilization (EIS)
Electronic Image Stabilization (EIS) can be used in environments where the product is mounted in an
exposed location and subject to vibrations, for example, wind or passing traffic. Turn on EIS to get a
smoother and steadier image without blur.
EIS also reduces the file size of the compressed image and lowers the bitrate of the video stream.
注
When EIS is turned on the image is cropped slightly, lowering the maximum resolution.
1. Go to Settings > Image > Image
2. Turn on EIS.

Overlays

Overlays are superimposed over the video stream. They are used to provide extra information during
recordings, such as a timestamp, or during product installation and configuration. You can add either
text or an image.
Show a text overlay in the video stream when the device detects motion
This example explains how to display the text "Motion detected" when the device detects motion.
and set the compression as low as possible.
and select MJPEG streaming.
and turn off Zipstream functionality.
Image without WDR.
Image with WDR.
range.
Exposure and adjust the
axis.com/web-articles/wdr
correction.
8
Exposure zone to cover the area
.