Axis Q6054 Mk III Manual page 12

AXIS Q6054 Mk III PTZ Network Camera
Additional settings
Make sure that AXIS Video Motion Detection is running:
1. Go to Settings > Apps
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs. If you need help, see the
user manual for AXIS Video Motion Detection 4
Create an action rule:
1. Go to Settings > System > Events
2. Type a name for the action rule.
3. From the list of triggers, select
4. From the list of actions, select
5. Select an existing stream profile or create a new one.
6. Enable and set the pre-trigger time to 5 seconds.
7. Enable While the rule is
8. Enable and set the post-trigger time to 60 seconds.
9. Select SD card
10.Click Ok.
Direct the camera to a preset position when the camera detects motion
This example explains how to set up the camera to go to a preset position when it detects motion in
the image.
Make sure that AXIS Video Motion Detection is running:
1. Go to Settings > Apps
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs. If you need help, see the
user manual for AXIS Video Motion Detection 4
Add a preset position:
Go to Settings > PTZ
Create an action rule:
1. Go to Settings > System
2. Type a name for the action rule.
3. From the list of triggers, select
4. From the list of actions, select
5. Select the preset position you want the camera to go to.
6. Click Ok.
> AXIS Video Motion
Applications
Record
active.
from the list of storage options.
> AXIS Video Motion
and set where you want the camera to be directed by creating a preset position.
> Events > Action rules
Applications
PTZ Control
Detection.
.
and add an action rule.
and then select
video.
Detection.
.
and add an action rule.
and then select
and then select
12
AXIS Video Motion Detection
AXIS Video Motion Detection
Preset Position.
(VMD).
(VMD).