Events - Axis Q6054 Mk III Manual

AXIS Q6054 Mk III PTZ Network Camera
Additional settings
2. Go to Input > Type
Edit the stream profile which is used for the recording:
3. Go to Settings > Stream
4. Select the stream profile and click Audio.
5. Select the checkbox and select Include.
6. Click Save.
7. Click Close.
Record and watch video
To record video you must first set up network storage, see , or have an SD card installed.
Record video
1. Go to the live view.
2. To start a recording, click Record. Click again to stop the recording.
Watch video
1. Click Storage > Go to
2. Select your recording in the list and it will play automatically.

Events

Set up rules for events
You can create rules to make your device perform an action when certain events occur. A rule consists of
conditions and actions. The conditions can be used to trigger the actions. For example, the device can
start a recording or send an email when it detects motion, or show an overlay text while the device is
recording.
To learn more, check out our guide
Trigger an action
1. Go to Settings > System > Events
device will perform certain actions. Action rules can be setup as scheduled, recurring, or for
example, triggered by motion detection.
2. Select what
the action rule, all of them must be met to trigger the action.
3. Select which
注
If you make changes to an active action rule, you have to restart the action rule for the changes to
take effect.
Record video when the camera detects motion
This example explains how to set up the camera to start recording to the SD card five seconds before
it detects motion and to stop one minute after.
and select your audio source.
and click
recordings.
Get started with rules for events
Trigger must be met to trigger the action. If you specify more than one trigger for
Action the device should perform when the conditions are met.
Stream profiles.
to set up an action rule. The action rule defines when the
11
.