Axis Q6054 Mk III Manual page 13

AXIS Q6054 Mk III PTZ Network Camera
Additional settings
Record video when the camera detects loud noises
This example explains how to set up the camera to start recording to the SD card five seconds before it
detects loud noise and to stop one minute after.
Turn on audio:
1. Set up the stream profile to include audio, see .
Set up audio detection:
2. Go to Settings > System > Detectors > Audio
3. Adjust the alarm level according to your needs.
Create a rule:
4. Go to Settings > System > Events
5. Type a name for the rule.
6. In the list of triggers, select
7. In the list of actions, select
8. Select the stream profile where audio has been turned on or create a new one.
9. Enable and set the pre-trigger time to 5 seconds.
10.Enable While the rule is
11.Enable and set the post-trigger time to 60 seconds.
12.Select SD card
13.Click OK.
Zoom in on a specific area automatically with gatekeeper
This example explains how to use the gatekeeper functionality to make the camera zoom in automatically
on the license plate of a car that passes through a gate. When the car has passed, the camera zooms out
to the home position.
Create the preset positions:
1. Go to Settings > PTZ > Preset
2. Create the home position that includes the entrance of the gate.
3. Create the zoomed-in preset position so that it covers the area in the image where you assume
that the license plate will appear.
Create a motion detection profile:
4. Go to Settings > Apps
5. Create a profile that covers the entrance of the gate and then save the profile. If you need help,
user manual for AXIS Video Motion Detection 4
see the
Create a rule:
6. Go to Settings > System > Events
7. Name the rule "Gatekeeper".
and add a rule.
Detectors
Record video.
active.
from the list of storage options.
positions.
and open AXIS Video Motion Detection.
and add a rule.
detection.
and then select Audio
.
13
Detection.