Troubleshooting; Reset To Factory Default Settings; Check The Current Firmware; Upgrade The Firmware - Axis Q6054 Mk III Manual

AXIS Q6054 Mk III PTZ Network Camera

Troubleshooting

Troubleshooting

Reset to factory default settings

重要
Reset to factory default should be used with caution. A reset to factory default resets all settings,
including the IP address, to the factory default values.
To reset the product to the factory default settings:
1. Press and hold the control button and the power button for 15–30 seconds until the status LED
indicator flashes amber. See .
2. Release the control button but continue to hold down the power button until the status LED
indicator turns green.
3. Release the power button and assemble the product.
4. The process is now complete. The product has been reset to the factory default settings. If no
DHCP server is available on the network, the default IP address is
5. Using the installation and management software tools to assign an IP address, set the password
and access the video stream.
It is also possible to reset parameters to factory default through the web interface. Go to
System > Maintenance

Check the current firmware

Firmware is the software that determines the functionality of network devices. One of your first actions
when troubleshooting a problem should be to check the current firmware version. The latest version may
contain a correction that fixes your particular problem.
To check the current firmware:
1. Go to the product's webpage.
2. Click the help menu .
3. Click About.

Upgrade the firmware

重要
Preconfigured and customized settings are saved when the firmware is upgraded (provided
that the features are available in the new firmware) although this is not guaranteed by Axis
Communications AB.
重要
Make sure the cover is attached during upgrade to avoid installation failure.
重要
Make sure the product remains connected to the power source throughout the upgrade process.
and click Default.
15
.
192.168.0.90
Settings >