Table of Contents
Advertisement
AXIS M5075-G PTZ Camera
Learn more
You can use the VAPIX® application programming interface (API) to hide the privacy masks.
Important
If you use multiple privacy masks it may affect the product's performance.
You can create several privacy masks. Each mask can have 3 to 10 anchor points.
Overlays
Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp,
or during product installation and configuration. You can add either text or an image.
The video streaming indicator is another type of overlay. It shows you that the live view video stream is live.
Wireless I/O (Z-Wave Plus
This is a security enabled Z-Wave Plus
enabled Z-Wave Plus v2 devices. The product can be operated in any Z-Wave
from other manufacturers. To increase the network reliability, all non-battery operated Z-Wave devices in the network act as
repeaters regardless of vendor. This product acts as the control device and the Z-Wave devices added to it act as secondary devices.
Considerations
Before using wireless I/O with Z-Wave Plus v2, consider the following:
•
To do any Z-Wave configurations, you need to be an administrator.
•
When performing Z-Wave related actions on the product's web page, such as adding, removing and replacing Z-Wave
devices or resetting the Z-Wave network, we recommend that you do not reload the page or move away from it when the
action process is ongoing. If done, the action's actual and displayed statuses may differ. To recover, you may need to wait
up to several minutes and then reload the page again.
•
Replication, i.e. copying network information to another control device, is executed as part of the inclusion process.
•
This product ignores all commands in the Basic Command Class.
Associations
•
This product supports one association group with group identifier = 1 (Lifeline).
•
Maximum number of devices that can be added to the association group = 1.
•
Group identifier 1 is used to send the Device Reset Locally report.
Command classes
This product supports the following command classes:
•
COMMAND_CLASS_APPLICATION_STATUS
•
COMMAND_CLASS_ASSOCIATION_V3 (secured)
•
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 (secured)
•
COMMAND_CLASS_CRC_16_ENCAP
•
COMMAND_CLASS_DEVICE_RESET_LOCALLY (secured)
•
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 (secured)
TM
v2)
TM
v2 product that can use encrypted Z-Wave Plus v2 messages to communicate with security
57
TM
network with compatible Z-Wave certified devices
Advertisement
Table of Contents
