Specifications; Led Indicators; Sd Card Slot; Buttons - Axis Q6054 Mk III Manual

AXIS Q6054 Mk III PTZ Network Camera

Specifications

Specifications

LED indicators

Status LED
Unlit
Green
Amber
Amber/Red

SD card slot

注 注 注 意 意 意
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when
inserting or removing the SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is
running. Unmount the SD card from the product's webpage before removal.
This product supports SD/SDHC/SDXC cards.
For SD card recommendations, see
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or
registered trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button
The control button is used for:
Resetting the product to factory default settings. See .
•
Power button
Press and hold the power button to temporarily power the product when the dome cover is
•
removed.
The power button is also used with the control button to reset the camera to factory default
•
settings. See .

Connectors

Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
注 注 注 意 意 意
Use the supplied midspan.
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup
completed.
Steady during startup. Flashes during firmware upgrade or reset to factory
default.
Flashes amber/red if network connection is unavailable or lost.
axis.com
.
19