Applications - Axis Q6054 Mk III Manual

AXIS Q6054 Mk III PTZ Network Camera
Additional settings
8. In the trigger list, select
profile.
9. In the action list, select the previously created preset position.
10.Click OK.
Record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to
the environment or to an object can trigger an action depending on the shock sensitivity range, which
can be set from 0 to 100. In this scenario, someone is throwing rocks at the camera after hours and
you would like to get a video clip of the event.
1. Go to Settings > System
2. Set shock detection to on, and set a value for the shock sensitivity.
Create an action rule:
3. Go to Settings > System > Events
4. Type a name for the action rule.
5. From the list of triggers, select
6. From the list of schedules, select
7. From the list of actions, select
8. Select an existing stream profile or create a new one.
9. Enable and set the pre-trigger time to 5 seconds.
10.Enable While the rule is
11.Enable and set the post-trigger time to 60 seconds.
12.Select an existing recipient or create a new one.
13.Click OK.

Applications

Applications
AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop
analytics and other applications for Axis products. To find out more about available applications,
downloads, trials and licenses, go to
To find the user manuals for Axis applications, go to
注
• Several applications can run at the same time but some applications might not be compatible
with each other. Certain combinations of applications might require too much processing power
or memory resources when run in parallel. Verify that the applications work together before
deployment.
Applications and then select the previously created motion detection
> Detectors.
and add an action rule.
Detectors and then select
After Hours.
Send Video Clip.
active.
axis.com/applications
help.axis.com
14
Shock detection.
.
.