Latch: Lower Anchor Belt - Maxi-Cosi Peri 180 Manual

53

LATCH: Lower Anchor Belt

Your vehicle's features may be considerably different
than those pictured here.
The lower anchors of LATCH (Lower Anchors and Tethers for
CHildren) is a universal system for installing car seats without using
vehicle seat belts. The LATCH: lower anchor belt can ONLY be used
in vehicles that have the lower anchor bars installed in designated
seating positions. Most vehicles manufactured after September 2002
are equipped with LATCH: lower anchor bars. Check your vehicle
owner's manual to see which seating positions may be equipped with
LATCH: lower anchor bars.
Lower Anchor Belt Parts
Adjuster
Connectors
Lower Anchor Belt
Storage Location
To Remove Lower Anchor Belt
from Vehicle's Lower Anchor Bars
1.
Remove the tension from the belt
by pushing down on the side of the car
seat with the adjuster.
2.
Then press the adjuster's button to
loosen the belt.
3. Press the release button on
connector, then pull the connectors out
of the vehicle seat.
The lower anchor belt MUST be properly
stored in its storage location when:
• using the vehicle belts to install the
base; OR
• the base is not installed in a vehicle.
Gather the lower anchor belt and place it
into the storage location as shown.
WARNING:
DO NOT use both the lower anchor belt and vehicle belt
at the same time.
each
To Store Lower Anchor Belt
54