Installing Base With Latch: Lower Anchor Belt - Maxi-Cosi Emme 360 Manual

Installing Base with
9
LATCH: Lower Anchor Belt
WARNING:
DO NOT use both the LATCH: lower anchor belt and
vehicle belt at the same time to install the car seat.
When anchors are available, you MUST ALWAYS
attach, adjust, and secure the tether (top anchorage)
strap when installing the car seat.
Before installing the car seat in your vehicle, check to see if you
need to adjust the buckle position for your child.
See page 23 for Rear-Facing buckle positions.
See page 30 for Forward-Facing buckle positions.
Once the car seat is installed, you will not be able to adjust the
buckle position.
Review Vehicle Owner's Manual
Determine what kind of vehicle belts your car has and how to use
them to lock a car seat in place OR
seating positions are located in your vehicle.
1
where LATCH: lower anchor
Place Base in Vehicle Seat
2
3
4
Lay Top Tether Strap
Over the Vehicle Seat
You will be installing the top
tether strap in steps 6 & 7.
Review the vehicle owner's
manual for the tether anchor
locations.
Take Lower
Anchor Belt Out of
Storage Location
Vehicle Belt Lock Off
MUST BE Closed
BEFORE Routing Lower
Anchor Belt
Weave Lower Anchor Belt
In & Out of Belt Path
Then attach lower anchor
hooks to the vehicle's lower
anchor.
continued on next page
10