Table of Contents
Advertisement
5. Select the play button (green triangle) on the window then push the left-click but-
ton to recall still image window. A maximum of eight windows can be shown on
the display.
6. Select [Quit] on the recalled still image window then push the left-click button to
close the window.
7. Select [Quit] on the still image window then push the left-click button to close the
window.
8.4
How to Save Settings
The FSV-85 MARK-2 can store the setting information in use as shown below.
1. Push the right-click button on the numeric/graphic data display to show the pop-
up menu.
2. Select [Record/Recall] then push the left-click button.
3. Select [Setting File] then push the left-click button.
4. Select [Save] then push the left-click button.
The file is given a name ("FSV85_yyyy_mm_dd_hh_mm_ss.ini") then shown in
the box.
Progress bar
5. Select a destination to save from the pull-down list.
6. Select [Save] then push the left-click button.
The progress bar at the bottom of the box shows the saving progress. The [Setting
File] menu appears when the saving is completed.
7. Long-press the MENU/ESC key to close all menus.
Note: If the capacity at the destination is approaching maximum, the message "Disk
capacity is approaching maximum. Delete unnecessary data." appears. In this case,
select [Delete Data] then push the left-click button to delete unnecessary data.
8. RECORD/RECALL OPERATION
Pull-down list
8-5
Advertisement
Table of Contents
