Furuno FSV85MK2 Manual page 193

├ Target Lock, U: No/F: Yes
│ ├ Tracking Method (Target Mark, Fish ), U: Yes/F: Yes
│ ├ Tilt Interlock (OFF, Tilt, Tilt&Range ), U: No/F: No
│ ├ Mark Interlock (OFF, Estimate Mark , Est&Fish Info), U: No/F: No
│ ├ Tracking Data (Horizontal/S, H&V ), U: No/F: No
│ ├ Threshold (1 to 30; 16 ), U: No/F: No
│ ├ Bottom Threshold (0 to 5; 3 ), U: No/F: No
│ ├ Target Speed Limit (1 to 15 kn; 5 kn ), U: No/F: No
│ ├ Smoothing (0.0 to 1.0; 0.5 ), U: No/F: No
│ ├ Target SPD Update (15Sec, 30Sec, 45Sec, 60Sec ), U: No/F: No
│ ├ Target Lock Window (Small , Large, Largest), U: No/F: No
│ ├ Dimension Setup (0 to 100t/1000 m
│ └ Volume Setup (0 to 100t/1000 m
├ Stabilization, U: No/F: Yes
│ ├ Stabilization (OFF, ON ), U: No/F: Yes
│ ├ Pitch Angle Cor (-10.0 to +10.0; 0.0 ), U: No/F: No
│ ├ Roll Angle Cor (-10.0 to +10.0; 0.0 ), U: No/F: No
│ └ Sensor (Standard , GPS Gyro), U: No/F: No
├ Test, U: No/F: Yes
│ ├ Board Test (Execute), U: No, F: No
│ ├ Panel Test (Execute), U: No, F: No
│ ├ Test Pattern (Execute), U: No, F: No
│ ├ RX Test (Execute), U: No, F: No
│ ├ Noise Test (Execute), U: No, F: No
│ └ TX (OFF , ON, ON (Any Position)), U: Yes/F: Yes
└ Initialization, U: No/F: Yes
├ Save Ship's Org (Execute), U: No, F: No
├ Recall Ship's Org (Execute), U: No/F: No
├ Set To Default (Execute), U: No, F: No
├ Item Attribution (Non-Changeable , Changeable), U: No/F: No
├ Date&Time Setting, U: No, F: No
│ ├Year (2018 to 2099), U: No, F: No
│ ├Month (1 to 12), U: No, F: No
│ ├Date (1 to 31), U: No, F: No
│ ├Hour (0 to 23), U: No, F: No
│ ├Minute (0 to 59), U: No, F: No
│ ├Second (0 to 59), U: No, F: No
│ └Timezone (Selecting timezone), U: No, F: No
└ Processor Unit IP (1 to 254; 4 ), U: No, F: No
6 Shortcut Menu
├ TX Pulse Length -H1
├ TX Power -H1
├ TVG-Near -H1
├ TVG-Medium -H1
├ TVG-Far -H1
├ AGC -H1
├ 2nd AGC -H1
├ Color -H1
└ Echo Average -H1
Continued from previous page
2
; 25t/1000 m
3 3
; 25t/1000 m
APPENDIX 1 MENU TREE
2
), U: No/F: No
), U: Yes/F: No
AP-5