Initialization Menu - Furuno FSV85MK2 Manual

7. OTHERS MENU
7.6.10

Initialization menu

Select [Initialization] on [Initial Setting] menu then push the left-click button to show the
[Initialization] menu.
Save Ship's Org: All menu settings are saved.
Recall Ship's Org: Recalls the saved menu settings. Default settings are memorized
in the internal memory. Use this item to recall the setting then rotate the USER PROG
control.
Set To Default: Restores all default menu settings.
Note 1: The hull unit must be fully retracted before restoring default settings. After ap-
plying the settings, restart the equipment.
Note 2: The transducer position setting is also set to default and the message
"UNREGISTERED" appears. See the Installation Manual (IME-13670) for how to en-
ter transducer position.
Item Attribution: Locks/unlocks protected menu settings. Asterisk-marked items on
this page and [Ship Speed] in the [Alarm & Audio] menu cannot be adjusted by the
user.
Date&Time Setting: Sets date, time and time zone.
Processor Unit IP: Changes the IP address of the processor unit. After changing the
setting, a restart message appears. Restart the processor to apply the new IP number.
Processor Unit IP
7-16
Date&Time Setting...
172. 31. 10.
Fixed Changeable
from 1 to 254