Table of Contents
Advertisement
Note 1: If you check the box for [Insert Comments], you can enter a comment when
you use [Record Still Image]. See the next topic.
Note 2: You can enter a comment only when saving the still image. You can not edit
the comment when recalling a still image.
Saving with the [Record Still Image] menu
1. Right click the numeric/graphic data display to show the pop-up menu.
2. Click [Record/Recall].
3. Click [Record Still Image].
The picture at the moment the button is pushed is shown on the display (preview).
If you checked the box for [Insert Comments], the software keyboard appears.
4. Click the character or symbol to enter the comment (max. 20 characters or sym-
bols).
5. Click [Enter] to close the software keyboard and the still image preview.
Note 1: The default function of the 1/F1 key saves the still image.
Note 2: You can select how long to show the preview display. Contact your dealer for
details.
Dual display
Select the monitor on which to capture the still image, 1: main monitor, 2: sub monitor.
1. Right click the numeric/graphic data display to show the pop-up menu.
2. Click [Record/Recall].
3. Click [Still Image].
Insert Comments
4. Select the monitor on which to capture the still image from the monitor list.
1: main monitor, 2: sub monitor.
5. Click the [•] button on the [Still Image] window to save the still image.
6. Click [Quit] on the [Still Image] window to close the window.
Still Image
Disk Info
File Name
File name list
8. RECORD/RECALL OPERATION
Quit
Monitor
1
Monitor list
8-3
Advertisement
Table of Contents
