Table of Contents
Advertisement
7. OTHERS MENU
7.6.1
Monitor Setting menu
The [Monitor Setting] menu sets the function of dual monitors. Select [Monitor Setting]
on the [Initial Setting] menu then push the left-click button.
Monitor Orientation
Selects the monitor's orientation (Horizontal, Vertical). To apply the setting, turn the
power off, then on again.
Note: In vertical orientation, [Menu Transparency] and [Display Transparency] set-
tings are not available.
2nd Monitor Setting
Selects the display format for the sub monitor (Off, Dual Display, Sub Display).
Turn the power off and on again after you change this setting.
• OFF: Select if a single monitor is connected.
• Dual Display: Main and sub monitors show different pictures in the combination dis-
play mode.
• Sub Display: Main and sub monitors show the same picture in the combination dis-
play mode.
Display mode
H2
H/S
V1
V2
Monitor Resolution
[Monitor Resolution] options are [SXGA], [UXGA] and [WUXGA]. To reflect the setting
change, turn on/off the power. After changing the monitor resolution, the size and dis-
play position of vertical display will change. Proceed with Monitor Setting as appropri-
ate. (Refer to section 3.3.)
7-8
Horizontal
Dual Display
Main monitor
Sub monitor
H1
H2
H
S
H
V1
H
V1/V2
Vertical
Sub Display
Main monitor
H1/H2
H/S
H/V1
H/V1/V2
Sub monitor
H1/H2
H/S
H/V1
H/V1/V2
Advertisement
Table of Contents
