Picture 1/2 Screen - Panasonic AWHE60H Operating Instructions Manual

Camera menu items
w Picture 1/2 screen
p
Pi c t u r e 1 / 2
C hroma L e v e l
A WB Mo d e
R Gai n
B Gai n
D etail
F lesh T o n e M o d e
D NR
R eturn
Chroma Level [–3 to +3]
Set here is the color intensity (chroma level) of the
images.
AWB Mode [ATW, AWB A, AWB B]
The white balance mode is selected here.
Select the mode when the coloring is not natural because
of the nature of the light source or other factors.
If the white color serving as the reference can be
recognized, subjects can be shot with natural coloring.
ATW: In this mode, the white balance is compensated
for automatically, even if changes occur in the
light source or color temperature, by a process of
continuous and automatic adjustment.
AWB A, AWB B:
When AWB A or AWB B is selected and the
white balance is executed, the adjustment results
obtained are stored in the memory selected.
When AWB A or AWB B is then selected, the white
balance stored in the selected memory can be
recalled.
Note
p  When preset settings have been called from the
AW-RP655, the AWB mode which was set when the
preset data was registered by the AW-RP655 will
be called.
(continued)
0
A W B A
0
0
H i g h
O f f
H i g h
R Gain, B Gain [–30 to +30]
When "AWB A" or "AWB B" is selected as the AWB Mode
setting, the white balance can be finely adjusted after
automatic white balance (AWB) has been performed.
Notes
p  When automatic white balance (AWB) is executed,
the R Gain and B Gain values are returned to "0".
p  When "AWB A" or "AWB B" is selected as the AWB
Mode setting, the R Gain and B Gain adjustment
values can be stored in the two memories, A and B.
p  When new values are set, the previous values are
erased.
Use each of the memories for a different purpose in
accordance with the shooting conditions.
p  In terms of registering values in the preset
memories, the R Gain and B Gain settings (–30 to
+30) are not stored, but the white balance (color)
status after adjustments have been made using the
R Gain and B Gain items can be stored.
p  If settings in the preset memories are recalled
when "Mode A" has been selected as the Preset
Scope setting, the R Gain and B Gain settings are
returned to "0".
p  When "ATW" has been selected as the AWB Mode
setting, the R Gain and B Gain cannot be adjusted.
Detail [Off, Low, High]
The image detail (image sharpness) is adjusted here.
When "Low" or "High" is selected, the detail is enhanced.
Flesh Tone Mode [Off, Low, High]
Set here is the flesh tone mode for displaying the subjects'
skin so that it appears more smoothly and eye-pleasingly.
When "Low" or "High" is selected, the effect is enhanced.
DNR [Off, Low, High]
Set here is the level of the digital noise reduction effect so
that light, noise-free and clear images will be output even
at night and in other low-brightness environments.
When "Low" or "High" is selected, noise can be eliminated.
However, there is an increased possibility that afterimages
may occur.
Return
Use this to return to the previous menu.
43