Maintenance Instructions; If You Need Assistance - Maytag Commercial MGD20MNTGW Installation Instructions Manual

Clean lint screen before and after each cycle.
■
Removing accumulated lint:
■
From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done by
a Whirlpool authorized person.
From the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
Keep area around dryer clear and free from combustible
■
materials, gas, and other flammable vapors and liquids.
Keep dryer area clear and free from items that would
■
obstruct the flow of combustion and ventilation air.
:
WARNING
Improper connection of the equipment-earthing conductor can result in a risk of electric shock. It is your
responsibility to check with a qualified electrician or service representative if you are in doubt as to whether the dryer is
properly earthed and meets all local codes and ordinances. Do not modify the plug provided with the dryer: If it will not fit
the outlet, have a proper outlet installed by a qualified electrician.
If you need help, contact the dealer from whom you purchased the appliance, or a Maytag designated service company. When
calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to
better respond to your request.
IF YOU NEED SERVICE:
Contact your authorized Maytag Commercial Laundry distributor. To locate your authorized Maytag Commercial Laundry distributor,
visit www.maytagcommerciallaundry.com.
For written correspondence:
Maytag Commercial Laundry Service Department
2000 N M 63
Benton Harbor, Michigan 49022-2632 USA

MAINTENANCE INSTRUCTIONS

MAINTENANCE INSTRUCTIONS
If dryer does not operate, check the following:
Electrical supply is connected.
■
Circuit breaker is not tripped or house fuse is not blown.
■
Door is closed. Listen closely to hear the door switch
■
activate.
Controls are set in a running or "on" position.
■
For gas dryers, check that gas supply shut-off valves are
■
set in open position.

IF YOU NEED ASSISTANCE

IF YOU NEED ASSISTANCE
7