Replacing Qsio Circuit Pack - Northern Telecom BCS35 Replacement Manual

48 QSIO circuit pack
ports. Since the SIO channels have both synchronous and asynchronous
ports, the baud rates corresponding to the switch settings are not the same
for all SIO baud switches.

Replacing QSIO circuit pack

Use the following procedure when replacing this circuit pack.
297-1001-536 Standard 01.03 August 1996
Note: Enter the baud rate set command BAUD to establish software control of
the QSIO channel. See 297–1001–543 DPP Alarm Clearing and Performance
Monitoring for further information.