Northern Telecom BCS35 Replacement Manual page 58

42 Error Control II and Error Control II Jumper circuit packs
Table 5–1
Error control II circuit pack (A5) options – part number: NT6M65AA
Device type
(number)
Jumper
Strap
DIP
Switch
Rotary
Switch
Switch
Notes:
Note 1: See Figure 5–1.
Note 2: There are no customer–definable options on this circuit pack. Information is shown for reference only. Use this
data for verification during initial DPP system installation and/or circuit pack replacement to make sure the replacement
circuit pack is set up the same as the circuit pack being replaced.
297-1001-536 Standard 01.03 August 1996
Position/setting
None Used
None Used
None Used
None Used
None Used
Function
End
Setting
Factory On–site