72 Disk Interface circuit pack
Table 8–1
Disk interface circuit pack (A11 and B11) options – part number: NT6M66AC and/or
NT6M66AL; 72–Mbyte and 140–Mbyte disk drives
Device type
(number)
Jumper
Strap
DIP
Switch
Rotary
Switch
Switch
Note: There are no customer–definable options on this circuit pack. Information is shown for reference only. Use this data
for verification during initial DPP system installation and/or circuit pack replacement to make sure the replacement circuit
pack is set up the same as the circuit pack being replaced.
297-1001-536 Standard 01.03 August 1996
Position/setting
None used
None used
None used
None used
None used
Function
Setting
Factory
On–site
Need help?
Do you have a question about the BCS35 and is the answer not in the manual?
Questions and answers