Siemens SIMATIC NET ET 200SP Operating Instructions Manual page 88

Diagnostics and maintenance
6.1 Diagnostics options
● Industrial Remote Communication
For the CP 1542SP-1 IRC, you receive telecontrol-specific information here. The group
has the following diagnostics pages:
– Partner
– Data point list
– Protocol diagnostics
● Time of day
Information on the time on the device
● Security
This group is available for modules with security functions.
– Status
– System log
– Audit log
– Communication status
– SINEMA RC - automatic VPN configuration
88
Information about the address settings of the partner, connection statistics,
configuration data of the partner and other diagnostics information.
Various information on the data points such as configuration data, value, connection
status etc.
With the button "Enable protocol trace", the frames received and sent by the module
are logged for several seconds.
With the function "Disable protocol trace", the logging is stopped and the data is
written to a log file.
With the function "Save", you can save the log file on the engineering station and then
analyze it.
This diagnostics page displays the most important security settings, the time of day,
and data relating to the configuration.
You can start logging system entries on this diagnostics page if a connection to a
SCALANCE S module is established. You can save the entries.
You can start logging the log data of the module on this diagnostics page. You can
save the entries.
This diagnostics page shows the states of the known security modules of the VPN
groups, their endpoints and the tunnel properties.
This diagnostics page shows the status of the automatic OpenVPN configuration and
the OpenVPN connections.
Operating Instructions, 12/2019, C79000-G8976-C426-05
CP 154xSP-1