Siemens SIMATIC NET ET 200SP Operating Instructions Manual page 33

Telecontrol via SINEMA Remote Connect
The following figure shows a configuration in which the CP 1542SP-1 IRC communicates
with the master station via a SINEMA Remote Connect Server. In this example, the CP uses
the protocol IEC 60870-5-104.
Figure 1-6
CP 154xSP-1
Operating Instructions, 12/2019, C79000-G8976-C426-05
Configuration example of an ET 200SP with CP 1542SP-1 IRC for telecontrol
communication via SINEMA RC
Application and functions
1.10 Configuration examples
33