Siemens SIMATIC NET ET 200SP Operating Instructions Manual page 76

Configuration
4.10 Messages: E-mails (CP 1543SP-1)
Open the message editor
You configure the individual messages (e-mails) in the message editor in STEP 7.
Alternatively, you can open the editor:
● By selecting the CP
Shortcut menu "Open the data point and messages editor"
● Via the project navigation:
Station > "Local modules" > CP > Messages
Double-clicking on the "Messages" entry opens the editor.
Creating messages
You create a new message by double clicking "<Add>" in the first table row with the grayed-
out entry.
You can change the default name of an e-mail, "Alarm", but it must be unique within the
module.
Message parameters
Here you configure the recipient, the subject and the text of the message.
76
Operating Instructions, 12/2019, C79000-G8976-C426-05
CP 154xSP-1