Quantum 4500P / 5500P / 5500 P-16 / 5500 P-18 / 5500Gt / 6500P / 6800P; Prior To Operation - Claas QUANTUM 3500 Service Parts

TIC
4.0 QUANTUM 4500P / 5500P / 5500 P-16 / 5500 P-18 / 5500GT /

4.0.1 Prior to operation

3 Hydraulic hoses
35 LS port (control line)
Important!
10/04
QUANTUM
6500P / 6800P
In this system, the setting of the tractor's pressure relief valve must be at
least 5 bar below the setting or pressure relief valve (8).
When the pressure relief valve (8) responds, the tractor pump starts
delivering. This may result in overheating of the hydraulic oil.
•
Clean the hose couplers of the hydraulic hoses (3) and the oil
outlets on the tractor before each hitching.
•
Connect the two hydraulic hoses (3) to a double-acting control unit
or a single-acting control unit with a free return line.
•
The pressurized line is identified by a red marking.
•
Never apply pressure to the return line (not marked).
•
Oil quantity from the tractor max. 60 l/min
Hydraulics
11-73