Dip Switches - Claas QUANTUM 3500 Service Parts

Electric System
2.5

Dip switches

2.5.1 Table 1
Dip Position Factory pre-
switch set position
1 Off On (top)
(bottom)
2 On (top)
2 Off Off (bottom) When extending the articulated
(bottom)
3 On (top)
3 Off
(bottom)
4 On (top)
4 Off Off (bottom) Automatic filling activated (metal
(bottom)
12-24
QUANTUM
Meaning for
QUANTUM
Test program
(by manufacturer only)
When extending the articulated
drawbar, the floor conveyor
speed changes to speed 1 (floor
conveyor standstill); after this, the
programmed speed will be re-
activated. When retracting the
articulated drawbar, the floor
conveyor speed changes to
speed 4; after this, the
programmed speed will be re-
activated.
drawbar, the floor conveyor
speed must be reduced to 4 (floor
conveyor running), the
programmed speed will not be
activated.
When retracting the articulated
drawbar, the floor conveyor
speed changes to speed 4; after
this, the programmed speed will
be re-activated.
Automatic filling (level 2), may be
deactivated by means of height
alarm button (key button housing
970 917.1).
Automatic filling (level 1), may be
changes from partial to complete
filling by means of height alarm
button (key button housing 970
917.1).
not possible
top and tine sensor with two OFF
switches and two ON switches)
Meaning for SPRINT
Test program
When extending the articulated
drawbar, the floor conveyor speed
changes to speed 1 (floor conveyor
standstill); after this, the programmed
speed will be re-activated. When
retracting the articulated drawbar, the
floor conveyor speed changes to
speed 4; after this, the programmed
speed will be re-activated.
When extending the articulated
drawbar, the floor conveyor speed
must be reduced to 4 (floor conveyor
running), the programmed speed will
not be activated.
When retracting the articulated
drawbar, the floor conveyor speed
changes to speed 4; after this, the
programmed speed will be re-
activated.
not possible
Basic position
Automatic filling activated (triangular
flap with one OFF switch and two ON
switches)
not possible
TIC
10/04