Table of Contents
Advertisement
Figure 21 Attaching the mounting bracket to the ceiling
4.
Connect a cable to the AP. Then position the four pegs at the AP rear into the keyhole slots in
the mounting bracket and slide the AP until it sits securely in the keyhole slots.
Figure 22 Attaching the AP to the mounting bracket
(Optional.) You can use a cable tie to secure the cable before attaching the AP to the mounting
bracket. First thread the cable tie through the auxiliary hole in the mounting bracket, leaving
the cable tie unfastened, and then adjust the cable length and fasten the cable tie to secure
the cable.
No cable tie is provided with the AP. Prepare one yourself as required.
Figure 23 Using a cable tie to secure the cable
5.
Verify that the AP is installed securely to prevent it from falling off.
9
Advertisement
Table of Contents
