Mitsubishi Electric MELSEC iQ-RX40NC6B Application User's Manual page 37

ON delay
When an output signal from the CPU module is turned on, this function turns on the external output after a certain time (output
delay time) elapsed.
The OFF state of an external output can be held for a certain time by using the ON delay even if the output signal from the
CPU module is turned on.
■Operation of the ON delay
The following figure shows an operation example of the ON delay.
Output from the CPU module (Y1)
Output in the module (Y1)
tps: Output delay time
ts: Scan time
: END processing of the CPU module
Setting procedure
Set the following items from "Application setting".
• "Output delay function enable/disable" ( Page 102 Output delay function enable/disable)
• "Output delay type setting" ( Page 102 Output delay type setting)
• "Output delay time setting" ( Page 103 Output delay time setting)
[Navigation window]  [Parameter]  [Module Information]  Target module  [Module Parameter]  [Application
setting]
ON
OFF
ON
OFF
ts tps
1 FUNCTIONS
35
1.2 Output Function
1