Mitsubishi Electric MELSEC iQ-RX40NC6B Application User's Manual page 114

Interrupt factor reset request [n]
Set this area to send an interrupt factor reset request.
Setting value
0
1
When 'Interrupt factor reset request [n]' (Un\G3328 to Un\G3343) corresponding to a generated interrupt factor has been set
to 1 (Reset request), the interrupt factor corresponding to the specified interrupt is reset. After that, the value of 'Interrupt
factor reset request [n]' (Un\G3328 to Un\G3343) changes to 0 (No reset request). A setting value of 2 or larger is regarded as
1 (Reset request).
n indicates the interrupt setting number. (n = 1 to 16)
■Buffer memory address
The following table shows the buffer memory address of this area.
Buffer memory name
Interrupt factor reset request
[n]
■Default value
The default value is set to 0 (No reset request) for all the areas.
Interrupt factor mask [n]
Set the mask for an interrupt factor to be used.
Setting value
0
1
When the value of 'Interrupt factor mask [n]' (Un\G3344 to Un\G3359) has been changed to 1 (Clear mask (Interrupt used))
and an interrupt factor occurs, an interrupt request is sent to the CPU module. A setting value of 2 or larger is regarded as 1
(Clear mask (Interrupt used)).
n indicates the interrupt setting number. (n = 1 to 16)
■Buffer memory address
The following table shows the buffer memory address of this area.
Buffer memory name
Interrupt factor mask [n]
■Default value
The default value is set to 0 (Mask (Interrupt not used)) for all the areas.
APPX
112
Appendix 3 Buffer Memory
Description
No reset request
Reset request
1 2 3 4 5
3328 3329 3330 3331 3332
Description
Mask (Interrupt not used)
Clear mask (Interrupt used)
1 2 3 4 5
3344 3345 3346 3347 3348
6 7 8 9 10
3333 3334 3335 3336 3337
6 7 8 9 10
3349 3350 3351 3352 3353
11 12 13 14 15
3338 3339 3340 3341 3342
11 12 13 14 15
3354 3355 3356 3357 3358
16
3343
16
3359