System Design; Design - Eclipse WX Series Manual

System Design

D
esigN
8
Design Structure
The design process is divided into the following steps:
1. Burner Option Selection Including:
• Burner Model / Size Selection
• Fuel Type
• Air Supply
• Combustor Type
• Control Motor
• Burner Configuration
• Gas Pipe Connection
• Flame Supervision
• Air Flow Switch
2. Blower Option Selection Including:
• Power Supply Frequency
• Pressure and Flow
• Blower Motor Type
• Blower Inlet
• Motor Orientation
3. Control Methodology Including:
• Burner Control
4. Ignition System Including:
• Ignition Transformer
• Trial for Ignition
5. Flame Monitoring Control System Including:
• Flame Sensor
• Flame Monitoring Control
6. Main Gas Shut-Off Valve Train Including:
• Component Selection
• Valve Train Size
7. Verify Chamber Design
• Firing Chamber Dimensions
Eclipse Winnox WX Series v1 Design Guide No. 111, 9/25/2008
3