Eclipse ThermJet TJSR Series Quick Instruction Manual

Thank you for purchasing burners from Eclipse. This Quick Instruction Guide will help with the unpacking and preparing
Figure 1.
Figure 2.
Eclipse ThermJet Self
Recuperative Burner
your burners for installation.
In order to protect the fragile components, self
recuperative burners are packaged and shipped partially
disassembled.
A standard shipment includes the burner air housing/
eductor/combustor assembly, the rear cover/nozzle
assembly, exhaust tube, extension flanges and spark
rods. Your packaging should be similar to Figure 1.
The exhaust housing and burner rear cover housing are
bolted to the frame of the shipping crate. A ratchet or
wrench will be required to remove those items from the
crate (Figure 2).
NOTE: Spark rods and gaskets are either secured in the
lower section of the crate or shipped in seperate
packaging. Ceramic exhaust tubes are also shipped
separately. Please do not forget to take care when
removing these items.
Model TJSR0020-TJSR0060
Quick Guide 208
2/9/2012