Specifications - Hover-1 HELIX Operation Manual

OPERATING PRINCIPALS
The Helix uses digital electronic gyroscopes and acceleration sensors
to control balance and motion, depending on the user's center of
gravity. The Helix also uses a control system to operate the motors
that are located within the wheels. The Helix has a built-in inertia
dynamic stabilization system that can assist with balance when
moving forward and backward, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model:
Net Weight:
Max Supported Weight:
Min Supported Weight:
Motor:
Max Speed:
Max Range:
Max Incline Angle:
Min Turning Radius:
Charge Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Ground Clearance:
Platform Height:
Tire Size:
Tire Type:
BT ID:
FCC ID:
UL Certification:
WARNING

SPECIFICATIONS

H1-HELX
13.77 lbs (6.25 kg)
160 lbs (72.6 kg)
44 lbs (20 kg)
400W (dual 200W motors)
Up to 7mph (11.2 km/h)
Up to 3 miles (4.8 km)
10°
0°
Up to 6 hours
Lithium-ion
36V
4Ah
AC 100V-240V, 50Hz/60 Hz
1.15 Inches (2.9 cm)
4.5 Inches (11.43 cm)
6.5 Inches (16.51 cm)
Non-pneumatic solid tires
D044460
2AANZHELX20B
UL2272 certifed
5