Balance & Calibration - Hover-1 HELIX Operation Manual

OPERATING RANGE
The Helix can travel up to 3 miles on a fully charged battery under
ideal conditions. The following are some of the major factors that will
affect the operating range of your Helix.
• Terrain: Operating range is highest when riding on a smooth, flat
surface. Riding uphill and/or on rough terrain will reduce operating
range significantly.
• Weight: A lighter user will have a higher operating range than a
heavier user.
• Ambient Temperature: Please ride and store the Helix in
recommended temperatures. This will increase operating range,
battery life, and overall performance of your Helix.
• Speed and Riding Style: Maintaining a moderate and consistent
speed while riding produces maximum operating range. Traveling
at high speeds for extended periods of time, frequent starts and
stops, and idling will decrease overall operating range.
BALANCE & CALIBRATION
If your Helix is unbalanced, vibrating, or not turning properly, you
can follow the steps below to calibrate it:
• First, place the Helix on flat ground or the floor. The foot mats
should be even with each other and not tilted forward or
backward. Make sure the charger is not plugged in and the
hoverboard is turned off.
• Press and hold the power button for a total of 10-15 seconds. The
hoverboard will turn on, and the battery indicator will light up.
• After the light flashes 5 times consecutively, you may release the
power button. Turn the hoverboard off and then back on.
Calibration is now complete.
WARNING
Riding the Helix while exceeding the
weight limit may increase the possibility
of injury or product damage.
When max speed is reached, the Helix will
beep to alert the user and tilt the rider
slowly back to prevent injury.
NOTES:
17