Specifications - Hover-1 ALL-STAR 2.0 Operation Manual

OPERATING PRINCIPALS
The ALL-STAR 2.0 uses digital All-STAR 2.0nic gyroscopes and
acceleration sensors to control balance and motion, depending on
the user's center of gravity. The ALL-STAR 2.0 also uses a control
system to drive the motors that are located within the wheels. The
ALL-STAR 2.0 has a built-in inertia dynamic stabilization system that
can help assist with balance when moving forward and backwards,
but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model:
Net Weight:
Load:
Max Speed:
Max Distance Range:
Max Incline Angle:
Minimum Turning Radius:
Charge Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Ground Clearance:
Platform Height:
Tire Type:
BT ID:
FCC ID:
(866) 831-1520
WARNING
Any ALL-STAR 2.0 that does not work properly
can cause you to lose control and fall.
Inspect the entire ALL-STAR 2.0 thoroughly
before every ride, and do not ride it until any
problems have been corrected.

SPECIFICATIONS

Hover-1 ALL-STAR 2.0 (DSA-STR2)
™
15.43 lbs (7 kg)
44-220 lbs (20-100 kg)
Up to 7 mph (11.3 km/h)
Up to 7 mph (11.3 km/h)
10°
0°
Up to 5 hours
Lithium-ion
25.2V
4.0Ah
AC 100-240V, 50/60Hz
1.18 Inches (3 cm)
4.72 Inches (12 cm)
Non-Pneumatic Solid Tires
D042258
2AANZSTR2
5