Specifications - Hover-1 SUPERSTAR EU-H1-SPR-CMB Original Instruction

OPERATING PRINCIPALS
The Superstar uses digital electronic gyroscopes and acceleration
sensors to control balance and motion, depending on the user's
center of gravity. The Superstar also uses a control system to drive
the motors that are located within the wheels. The Superstar has a
built-in inertia dynamic stabilization system that can help assist with
balance when moving forward and backwards, but not while
turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model:
Net Weight:
Load:
Max Speed:
Max Distance Range:
Max Incline Angle:
Minimum Turning Radius:
Maximal Continuous
Nominal Power:
Charging Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Wheel Size:
Tire Type:
Bluetooth Range:
Bluetooth Speaker:
UL Certification:
Contains FCC ID:
BT ID:
WARNING
Any Superstar that does not work properly
can cause you to lose control and fall.
Inspect the entire Superstar thoroughly
before every ride, and do not ride it until
any problems have been corrected.

SPECIFICATIONS

Hover-1™ Superstar (EU-H1-SPR-CMB)
7.1 kg
20-100 kg
Up to 7 mph (11 km/h)
Up to 6 miles (9.5 km)
10°
0°
200W
Up to 4.5 hours
Lithium-ion
25.2 V
4.0 Ah
AC 100-240V, 50/60 Hz
6.5 Inches (16.51 cm)
Non-Pneumatic Solid Tires
Up to 33ft (10 m)
V2.0 with stereo sound quality
UL 2272 approved
2AANZMODB
D042773
5