Operating Principals; Specifications - Hover-1 SYPHER Operation Manual

OPERATING PRINCIPALS

The Sypher uses digital electronic gyroscopes and acceleration sensors
to control balance and motion, depending on the user's center of gravity.
The Sypher also uses a control system to operate the motors that are
located within the wheels. The Sypher has a built-in inertia dynamic
stabilization system that can assist with balance when moving forward
and backward, but not while turning.
TIP – To increase your stability, you must shift your weight during turns,
especially when entering a turn at higher speeds.
Model:
Net Weight:
Max Supported Weight:
Min Supported Weight:
Max Speed:
Max Range:
Max Incline Angle:
Rated Power:
Max Power:
Charge Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Ground Clearance:
Platform Height:
Tire Size:
Tire Type:
BT ID:
FCC ID:
WARNING

SPECIFICATIONS

Hover-1™ DSA SYP
16.21 lbs (7.35 kg)
220 lbs (100 kg)
44 lbs (20 kg)
Up to 7 mph (11.2 km/h)
Up to 7 miles (11.2 km)
8°
150W x 2 (dual motor)
200W x 2 (dual motor)
Up to 5 hours
Lithium-ion
25.2V
4.0Ah
AC 100V 240V, 50Hz/60Hz
2 inches (5.08 cm)
4.5 inches (11.43 cm)
6.5 inches (16.51 cm)
Non-Pneumatic Solid Tires
D042258
2AANZSYP
5