Operating Principals; Specifications - Hover-1 REBEL Operation Manual

OPERATING PRINCIPALS

The Rebel uses digital electronic gyroscopes and acceleration sensors to
control balance and motion, depending on the user's center of gravity.
The Rebel also uses a control system to operate the motors that are
located within the wheels. The Rebel has a built-in inertia dynamic
stabilization system that can assist with balance when moving forward
and backward, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when entering a
turn at higher speeds.
Model:
Net Weight:
Max Supported Weight:
Min Supported Weight:
Motor:
Max Speed:
Max Range:
Max Incline Angle:
Minimum Turning Radius:
Charge Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Ground Clearance:
Platform Height:
Tire Size:
Tire Type:
UL Certi ication:
WARNING

SPECIFICATIONS

H1 REBL
13.23 lbs (6 kg)
130 lbs (60 kg)
44 lbs (20 kg)
220W (dual 110W motors)
Up to 6 mph (9.7 km/h)
Up to 3 miles (4.8 km)
5°
0°
Up to 7 hours
Lithium-ion
25.2V
2Ah
AC 100V 240V, 50Hz/60Hz
1.2 Inches (3.05 cm)
4.5 Inches (11.43 cm)
6.5 Inches (16.51 cm)
Non-Pneumatic Solid Tires
UL2272 certi ied
5