Balance & Calibration - Hover-1 RIVAL Original Instruction

OPERATING RANGE
The Rival can travel a distance up to 3 miles on a fully charged
battery in ideal conditions. The following are some of the major
factors that will affect the operating range of your Rival.
• Terrain: Riding distance is highest when riding on a smooth, flat
surface. Riding uphill and/or on rough terrain will reduce distance
significantly.
• Weight: A lighter user will have further range than a heavier user.
• Ambient temperature: Please ride and store the Rival under
recommended temperatures, which will increase riding distance,
battery life, and overall performance of your Rival.
• Speed and Riding Style: Maintaining a moderate and consistent
speed while riding produces maximum distance. Traveling at high
speeds for extended periods, frequent starts and stops, idling and
frequent acceleration or deceleration will decrease overall
distance.
BALANCE & CALIBRATION
If your Rival is unbalanced, vibrating, or not turning properly, you
can follow the below steps to calibrate it.
• First, place the Rival on a flat, horizontal surface such as the floor
or a table. The foot mats should be even with each other and not
tilted forward or backward. Make sure the charger is not plugged
in and the board is turned off.
• Press and hold the ON/OFF button for a total of 15 seconds. The
scooter will turn on, lighting the battery indicator on the board.
• After the light flashes 5 times consecutively you may release the
ON/OFF button.
• Turn the board off and then turn the board back on. Calibration
will now be completed.
WARNING
Overweight exertion on the Rival may
increase possibility of injury or product
damage.
To prevent injury, when max speed is
reached, the Rival will beep to alert the
user and tilt the rider slowly back.
NOTES:
15