Balance & Calibration - Hover-1 RANGER PRO Operation Manual

Table of Contents

Advertisement

OPERATING RANGE
The hoverboard can travel a distance up to 8 miles on a fully
charged battery in ideal conditions. The following are some of the
major factors that will affect the operating range of your device.
• Terrain: Riding distance is highest when riding on a smooth, flat
surface. Riding uphill and/or on rough terrain will reduce distance
significantly.
• Weight: A lighter user will have further range than a heavier user.
• Ambient temperature: Please ride and store the device under
recommended temperatures, which will increase driving distance;
battery life, and overall performance of your device.
• Speed and Riding Style: Maintaining a moderate and consistent
speed while riding produces maximum distance. Traveling at high
speeds for extended periods, frequent starts and stops, idling and
frequent acceleration or deceleration will decrease overall
distance.
BALANCE & CALIBRATION
If your hoverboard is unbalanced, vibrating, or not turning properly,
you can follow the below steps to calibrate it.
• First, place the hoverboard on a flat, horizontal surface such as the
floor or a table.  The foot mats should be even with each other and
not tilted forward or backward.  Make sure the charger is not
plugged in and the board is turned off.
• Press and hold the ON/OFF button for a total of 10-15 seconds.
When the lights in the front of board keep flashing,you may release
the power button.
• Turn the board off and then turn the board back on. Calibration
will now be completed.
WARNING
Overwei g ht exerti o n on the devi c e may
i n crease possi b i l i t y of i n j u ry or product damage.
NOTES:
To prevent injury, when max speed is
reached, the hoverboard will beep to
alert the user and tilt the rider slowly back.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

H1-rgpro

Table of Contents