Operating Range; Balance & Calibration - Hover-1 MY FIRST HOVERBOARD Operation Manual

OPERATING RANGE

The hoverboard can travel up to 3 miles on a fully charged battery under
ideal conditions. The following are some of the major factors that will
a ect the operating range of your hoverboard.
• Terrain: Operating range is highest when riding on a smooth, lat
surface. Riding uphill and/or on rough terrain will reduce operating range
signi icantly.
• Weight: A lighter user will have a higher operating range than a heavier
user.
• Ambient Temperature: Please ride and store the hoverboard in
recommended temperatures. This will increase operating range, battery
life, and overall performance of your hoverboard.
• Speed and Riding Style: Maintaining a moderate and consistent speed
while riding produces maximum operating range. Traveling at high
speeds for extended periods of time, frequent starts and stops, and idling
will decrease overall operating range.
BALANCE & CALIBRATION
If your hoverboard is unbalanced, vibrating, or not turning properly,
you can follow the steps below to calibrate it:
• First, place the hoverboard on lat ground or the loor. The foot mats
should be even with each other and not tilted forward or backward. Make
sure the charger is not plugged in and the hoverboard is turned o .
• Press and hold the power button for a total of 10 15 seconds. The
hoverboard will turn on, and the battery indicator will light up.
• After the light lashes 5 times consecutively, you may release the power
button. Turn the hoverboard o and then back on. Calibration is now
complete.
WARNING
Riding the hoverboard while exceeding the
weight limit may increase the possibility of
injury or product damage.
NOTES:
When max speed is reached, the hoverboard
will beep to alert the user and tilt the rider
slowly back to prevent injury.
15