Operating Range; Balance & Calibration - Hover-1 TITAN Operation Manual

OPERATING RANGE

The Titan can travel up to 8 miles on a fully charged battery under ideal
conditions. The following are some of the major factors that will a ect the
operating range of your Titan.
• Terrain: Operating range is highest when riding on a smooth, lat
surface. Riding uphill and/or on rough terrain will reduce operating range
signi icantly.
• Weight: A lighter user will have a higher operating range than a heavier
user.
• Ambient Temperature: Please ride and store the Titan in recommended
temperatures. This will increase operating range, battery life, and overall
performance of your Titan.
• Speed and Riding Style: Maintaining a moderate and consistent speed
while riding produces maximum operating range. Traveling at high
speeds for extended periods of time, frequent starts and stops, and idling
will decrease overall operating range.
BALANCE & CALIBRATION
If your Titan is unbalanced, vibrating, or not turning properly, you can
follow the steps below to calibrate it:
• First, place the Titan on lat ground or the loor. The foot mats should be
even with each other and not tilted forward or backward. Make sure the
charger is not plugged in and the hoverboard is turned o .
• Press and hold the power button for a total of 10 15 seconds. The
hoverboard will turn on, and the battery indicator will light up.
• After the light lashes 5 times consecutively, you may release the power
button. Turn the hoverboard o and then back on. Calibration is now
complete.
WARNING
Riding the Titan while exceeding the
weight limit may increase the possibility of
injury or product damage.
NOTES:
When max speed is reached, the Titan will
beep to alert the user and tilt the rider slowly
back to prevent injury.
17