Advertisement
STEP 19: (FINISH WIRING)
19.1 Use a supplied cable tie to secure the wiring harness to
the heater hoses. See Figure 19.1.
19.2 Use two more cable ties to secure the wiring harness to
the heater hoses near the fuel filter as well as to the
battery cables running along the frame. See Figure
19.2.
19.3 Route the wiring harness around the front of the engine
and secure to vehicle wiring with a cable tie. See
Figure 19.3. Ensure the new wire harness will not
contact the engine fan, pulleys, or exhaust.
CAB INSTALLATION
Cable Tie
Fig. 19.1 (Secure Wiring Harness to Heater Hoses)
Cable Ties
Fig. 19.2 (Secure Wiring Harness to Heater Hoses)
Cable Tie
Fig. 19.3 (Route Wiring Harness In Front of Engine)
17 of 29
Advertisement
