Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL
BExBGL2D-P
LED Beacon
ATEx/IECEx & UKEx Gas & Dust
1. Product Table
It is important that a suitable power supply is used to run the equipment. The power supply selected must have the necessary capacity
to provide the input current to all of the units.
The above table shows the input current taken by the various beacons and shows the maximum voltage at which the beacons can be
operated:
The input current will vary according to the voltage input level.
2. Warnings
DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT
DO NOT OPEN WHEN ENERGIZED
POTENTIAL ELECTROSTATIC CHARGING HAZARD – CLEAN ONLY WITH A DAMP CLOTH
COVER BOLTS CLASS A4-80
USE HEAT RESISTING CABLES AND CABLE GLANDS (RATED 110°C) AT AMB. TEMPERATURES OVER
40°C
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH
Document No. D210-00-401-IS
Nominal
Unit Type Code
Input Voltage
BExBGL2DPDC024
24Vdc
BExBGL2DPAC115
115Vac
BExBGL2DPAC230
230Vac
Issue 6
BExBGL2D-P
Nominal
Input Current
240mA
95mA
48mA
12-09-2022
Max I/P Voltage
54Vdc
126Vac 50/60Hz
253Vac 50/60Hz
www.e2s.com
Tel: +44 (0)208 743 8880
Sheet 1 of 6
Advertisement
Table of Contents
Related Manuals for E2S BExBGL2D-P
Summary of Contents for E2S BExBGL2D-P
- Page 1 INSTRUCTION MANUAL BExBGL2D-P LED Beacon ATEx/IECEx & UKEx Gas & Dust BExBGL2D-P 1. Product Table Nominal Nominal Unit Type Code Max I/P Voltage Input Voltage Input Current BExBGL2DPDC024 24Vdc 240mA 54Vdc BExBGL2DPAC115 115Vac 95mA 126Vac 50/60Hz BExBGL2DPAC230 230Vac 48mA 253Vac 50/60Hz It is important that a suitable power supply is used to run the equipment.
- Page 2 4. Zones, Gas Group, Category and 3. Marking & Rating Information Temperature Classification The BExBGl2D-P comply with the following standards for hazardous The units can be installed in locations with the following conditions: locations: 3.1 ATEX / IECEx & UKEx Ratings...
-
Page 3: Special Conditions For Safe Use
Never use the cover bolts to force the cover into position. European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D210-00-401-IS Issue 6... -
Page 4: Cable Connections
When using the internal earth terminal ensure that the stainless steel M4 flat washer is between the incoming earth wire and the enclosure. European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D210-00-401-IS Issue 6... -
Page 5: Line Monitoring
Strike Strike Table 1: Switch Positions for Flash Patterns Fig. 6 End of Line Resistor Placement European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D210-00-401-IS Issue 6 12-09-2022... -
Page 6: Maintenance, Overhaul & Repair
M5x16 Hex Socket Screw equipment. M5 Spring Washer The beacon cover is interchangeable, contact E2S Ltd for a replacement cover available in various colours. M5 Plain Washer To change the cover, unscrew the M5 socket head screws and Guard remove the M5 screws, M5 spring &... -
Page 9: Eu Declaration Of Conformity
EN 60529:1991 + A1:2000 + A2:2013. - Degrees of protection provided by enclosures (IP code) – enclosure rated IP66/67 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-004_Issue_N (BExBG) - Page 1 of 2 - QAF_252_Issue_5... - Page 10 This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC-004_Issue_N Quality Assurance Manager Date and Place of Issue: London, 20/04/2022 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-004_Issue_N (BExBG) - Page 2 of 2 - QAF_252_Issue_5...
-
Page 11: Equipment Type
EN 60529:1991 / A1:2000 / A2:2013 - Degrees of protection provided by enclosures (IP code) – enclosure rated IP66/67 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-105_Issue_A (BExBG)- Page 1 of 2 - QAF_252_Issue_5... - Page 12 This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC-105_Issue_A Quality Assurance Manager Date and Place of Issue: London, 12/09/2022 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-105_Issue_A (BExBG) - Page 2 of 2 - QAF_252_Issue_5...
Need help?
Do you have a question about the BExBGL2D-P and is the answer not in the manual?
Questions and answers