Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL
D2xB1XH1 & D2xB1XH2 Xenon Beacons
For use in Hazardous Locations
1) Product Table
D2xB1XH1
D2xB1XH2
*max. rms current at worst-case voltage in voltage range
For detailed max current ratings of the device please see Section 13.
Table 1: Electrical Ratings.
2) Warnings
DO NOT OPEN WHEN AN EXPLOSIVE
ATMOSPHERE IS PRESENT
DO NOT OPEN WHEN ENERGISED
POTENTIAL ELECTROSTATIC CHARGING
HAZARD - CLEAN ONLY WITH A DAMP
CLOTH
HIGH VOLTAGE SHOCK HAZARD. WAIT 5
MINUTES AFTER REMOVING POWER
BEFORE OPENING THE ENCLOSURE
Avertissement:
NE PAS OUVRIR UN PRESENCE
D'ATMOSPHERE EXPLOSIVE
NE PAS OUVRIR ENERGIE
DANGER POTENTIEL CHARGE
ÉLECTROSTATIQUE - NETTOYER
UNIQUEMENT AVEC UN CHIFFON HUMIDE
HAUT TENSION, RISK DE CHOC.
ATTENDEZ 5 MINUTES APRES AVOIR
DEBRANCHE L'ALIMENTATION AVANT
D'OUVRIR LA BOITIER
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH
Document No. D211-00-251-IS
Model
Issue 1
D2XB1XH1
D2XB1XH2
Nom. Voltage
24Vdc
48Vdc
3) Rating & Marking Information
3.1. Public Mode Fire Alarm Ratings
The D2xB1XH1 and D2xB1XH2 are certified for use as public
mode visual alarm devices in accordance with UL1971 Third
Edition and UL1638 Fifth Edition / CAN/ULC-S526 Fourth
Edition.
See fire instruction manual D211-00-251-IS-SC-UL.
20-08-22
Voltage Range
20-28Vdc
48Vdc
www.e2s.com
Max Operating
Current*
296mA
609mA
Tel: +44 (0)208 743 8880
Sheet 1 of 6
Advertisement
Table of Contents
Related Manuals for E2S D2xB1XH1
Summary of Contents for E2S D2xB1XH1
- Page 1 3.1. Public Mode Fire Alarm Ratings ATMOSPHERE IS PRESENT DO NOT OPEN WHEN ENERGISED The D2xB1XH1 and D2xB1XH2 are certified for use as public POTENTIAL ELECTROSTATIC CHARGING mode visual alarm devices in accordance with UL1971 Third HAZARD - CLEAN ONLY WITH A DAMP...
- Page 2 Explosive Atmospheres - Equipment Dust Ignition Protection by Enclosure "t" Ratings Ratings D2xB1XH1 : Ex ec IIC T2 Gc Ta -40°C to +50°C Ex tc IIIC T80°C Dc Ta -40°C to +50°C D2xB1XH1: Class I Zone 2 AEx ec IIC T2 Gc Ta -40°C to +50°C...
-
Page 3: Special Conditions Of Use
200ºC certified cable entry and/or blanking devices during (D2xB1XH1 only) installation. Dust Groupings (ATEX / IECEx / UKEX only) 6) Product Mounting and Access Group IIIA Combustible Flyings 6.1. Location and Mounting Group IIIB... -
Page 4: Cable Connections
On D2xB1XH1 & D2xB1XH2 DC units, DC reverse line monitoring can be used if required. All DC beacons have a For use in explosive dust atmospheres, a minimum ingress blocking diode fitted in their supply input lines. -
Page 5: Maintenance, Overhaul & Repair
M5 spring washer and M5 nut. DIP Switch Please note that the D2xB1XH1 & D2xB1XH2 beacons have a DIP Switch that is NOT customer configurable. This should only ever be set to ‘00’. -
Page 6: Electrical Ratings
0.609A For Public Mode Fire Alarm use ## max. rms current at worst-case voltage in voltage range. European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D211-00-251-IS Issue 1... - Page 7 For use in Hazardous Locations Public Mode Fire Alarm Ratings The D2xB1XH1 and D2xB1XH2 are certified for use as public mode visual alarm devices in accordance with UL1971 Third Edition and UL1638 Fifth Edition / CAN/ULC-S526 Fourth Edition. For use in public-mode fire alarm systems the beacon must be installed without the wire guard or plastic lens cover.
- Page 8 15° 30° 45° 60° 75° 90° Fig. 2 – Vertical dispersion angles for wall mounting Table 2A – D2xB1XH1 - Vertical Light Output Dispersion for Wall Mounting Viewing % Of Rating Intensity (cd) at 1Hz flash rate Angle 18.18 0°...
- Page 9 30° 30° 15° 15° Fig. 3 – Vertical dispersion angles for ceiling mounting X and Y planes Table 3A– D2xB1XH1 – Vertical Light Output Dispersion for Ceiling Mounting Viewing Angle % Of Rating Intensity (cd) at 1Hz flash rate 18.18 0⁰...
- Page 10 1Hz (60fpm) 1.04A 0.437A D2xB1XH2DC024 24Vdc 20-28Vdc 1Hz (60fpm) 0.992A 0.620A _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D211-00-251-IS-SC-UL Issue A 22-07-2022 Sheet 4 of 4...
- Page 11 +ve OUT +ve IN EARTH OUT EARTH IN ALL DIMENSIONS IN MM IF IN DOUBT, ASK - R.S. RAIT 27-06-2019 DO NOT SCALE warning signals D2xB1XH1 & D2xB1XH2 UL1971 PUBLIC MODE FIRE B. ISARD BEACONS WIRING DIAGRAM 27-06-2019 D211-06-251 R.N.POTTS 27-06-2019...
-
Page 12: Eu Declaration Of Conformity
Other Standards and Regulations EN 60529:1992+A2:2013 - Degrees of protection provided by enclosures (IP code) – enclosure rated IP66 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-061_Issue_J (D2x).docx - Page 1 of 2 - QAF_252_Issue_5... - Page 13 This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC-061_Issue_J Quality Assurance Manager Date and Place of Issue: London, 22/08/2022 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-061_Issue_J (D2x).docx - Page 2 of 2 - QAF_252_Issue_5...
- Page 14 Other Standards and Regulations EN 60529:1992+A2:2013 ‐ Degrees of protection provided by enclosures (IP code) – enclosure rated IP66 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-102_Issue_A - Page 1 of 2 - QAF_252_Issue_5...
- Page 15 This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC‐102_Issue_A Quality Assurance Manager Date and Place of Issue: London, 22/08/2022 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-102_Issue_A - Page 2 of 2 - QAF_252_Issue_5...
Need help?
Do you have a question about the D2xB1XH1 and is the answer not in the manual?
Questions and answers