Swing-Away Controller Bracket - Sunrise Medical QUICKIE Sedeo Pro Advanced Seating Manual

4.11 Swing-away controller bracket

The joystick is mounted with a mechanism that allows the
joystick to be locked in a forward or retracted position, and
can accommodate a mid-line mount so the joystick can be
located in the centre of the wheelchair.
Swing-away, (Fig. 4.33).
• To Swing-away the joystick, push outward on the inside of
joystick.
• Push the joystick away from the front of the armrest until it
locks into the outside swing-away position.
• To return to forward position, push the back of the joystick,
forward until it locks into place.
• To Swing-away the joystick to the inside, push inward on the
outside of joystick.
• Push the joystick away from the front of the armrest until it
locks into the inside swing-away position.
• To return to forward position, push the back of the joystick,
forward until it locks into place.
Pre-setting depth of the controller, (Fig. 4.34)
1. Loosen (A).
2. Slide (B) into desired position.
3. Tighten (A).
There are two ways to pre-set the height of the controller.
Pre-setting height of the controller (1), (Fig. 4.35).
1. Loosen (A).
2. Slide (C) into desired position.
3. Tighten (A).
Pre-setting height of the controller (2), (Fig. 4.36)
1. Loosen (D).
2. Slide (B) into desired position.
3. Tighten (D).
20
C
D
Sedeo Pro Advanced/Advanced UP Rev.A
Fig. 4.33
Fig. 4.34
A
Fig. 4.35
B
Fig. 4.36