Pre-Set Seat Depth; Sedeo Pro Advanced (Standard); Sedeo Pro Advanced - Sunrise Medical QUICKIE Sedeo Pro Advanced Seating Manual

4.2 Pre-set seat depth, (Fig. 4.4)
CAUTION!
When a bigger seat depth is required, ensure that the cables are
lengthened before the mechanical adjustment takes place.
Be aware. As described below, there is a different procedure for
adjusting the seat depth in case of Sedeo Pro Advanced with a
standing function (Sedeo Pro Advanced UP).
DANGER!
We strongly recommend that you contact your Sunrise Medical
approved service agent to adjust the seat depth, because
adjusting the seat depth will affect the centre of gravity.
4.2.1 Sedeo Pro Advanced (Standard), (Fig. 4.4)
• Use a 5.0 mm Allen Key, (Hex Wrench).
• Loosen the 2 screws, (A), on the bottom of the outer seat
plate, but do not take the screws out as these prevent the
shift pieces from pulling out.
• The back assembly can now be shifted backwards or forwards
to adjust the seat depth.
• Tighten the screws.
4.2.2 Sedeo Pro Advanced UP
• Use a 5.0 mm Allen Key, (Hex Wrench).
• Loosen the two screws on both sides (A), on the bottom of
the outer seat plate, and take the bolts out (Fig 4.4).
• The back assembly can now be shifted backwards or forwards
to adjust the seat depth.
• Tighten the screws.
• In addition, adjust the armrest linkage simultaneously
corresponding the marker holes (B in Fig. 4.5).
DANGER!
Adjusting seat depth on a Q700 UP requires additional steps.
• Besides the seat depth adjustment as described in 4.2.2, the
armrest linkage (Fig. 4.4) needs to be adjusted simultaneously.
• Use the corresponding markings on the seat depth in parallel
to the armrest linkage.
• Not doing so will lead to mechanical clashes and results in
damaging the product.
Sedeo Pro Advanced/Advanced UP Rev.A
Fig. 4.4
A
Fig. 4.5
B
11