Z-Finity™ Footrest System (Option); Swing In/Out Hangers And Footrests; Heavy-Duty Lift-Off Footrests (Option); Articulating/Elevating Legrest (Option) - Sunrise Medical Zippie TS Manual

Hide thumbs Also See for Zippie TS:

Table of Contents

Z IPPI E T S

K. Z-FINITY

FOOTREST SYSTEM (Option)

™

With the Z-finity footrest system, Sunrise Medical offers either a single Flip-up Footplate (A), or dual foot-

plates (B) that are able to accommodate all of the possible heights and adjustment angles that the rider may

require for their comfort and support.

L. SWING IN/OUT HANGERS/FOOTRESTS

Exterior Mount (60°, 70º, 80°), Front Mount (70º, 80°,90°)

1. Installation

a. Place swing-in/swing-out pivot saddle into the receiver (C) on front frame tube with the footrest

facing inward or outward from the frame.

b. Rotate the footrest inward until it locks into place on locking plate (D).

2. Removal

a. To remove footrest, release latch (E) by pulling lever upward or pushing lever downward.

b. Rotate footrest inward or outward and lift.

M. HEAVY-DUTY, LIFT-OFF FOOTRESTS (optional)

1. Installation

Slide pivot saddle (F) over receiver (G) on front frame tube until it locks into place.

2. Removal

To remove footrest, push release latch (H) while lifting up footrest from receiver.

N. ARTICULATING / ELEVATING LEGREST (optional)

1. Installation or Removal

To install or remove Articulating Legrest (ALR) see instructions for Swing-away Footrest installation.

2. Elevation Adjustment

a. To raise legrest, lift to desired position. Legrest will automatically lock in place.

b. To lower legrest, while seated in chair, press release lever ( I ) down and lower legrest to desired

position. Legrest will automatically lock in place.

VIII. USE AND MAINTENANCE

Articulating Legrest shown

MK-100208 RevB

Table of Contents