Avery Dennison AP 4.4 User & Service Manual page 6

09/09 Rev. 5.03-01
Impression accuracy
[3] The impression accuracy depends on the print position on the label: the longer the distance to the gap
Reading examples:
A: Print positioin 1 is located 50 mm behind the gap position. The maximum
possible deflection from the theoretical print position is +/- 1.5 mm.
B: Print positioin 1 is located 250 mm behind the gap position. The maximum
possible deflection from the theoretical print position is +/- 3.5 mm.
stock / foil combinations. Since the deflection of the print position strongly
depends on the applied label stock / foil combination, it can turn out higher if
unfavorable combinations are used.
Image formats
BMP, PCX, JPEG, TIFF, GIF, Easy Plug logos
USER / SERVICE MANUAL
AP 4.4 – AP 5.4
B
A
A
B
is, the lower is the impression accuracy. The maximum impression accuracy is at the gap position with
+/- 1 mm.
Those values are empirical for typical applications with common label
6
Specifications