Table of Contents
Advertisement
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following coorective steps:
P R O B L E M
Leakage under the
handle
The aerator has an
irregular or reduced
completely
There is leaking from the
sink drain at the base of
the sink.
water.
C A U S E
Bonnet nut (12) has
come loose
The aerator is dirty or
Cartridge may need to
be adjusted or replaced
The sink has a rough or
irregular surface.
hose connectors is dirty. water valve and unscrew the
A C T I O N
Remove the cover button (16).
Lossen screw (15) with hex
wrench (17). Remove the
handle (14). Unscrew cap (13)
(by hand only). Tighten bonnet
nut (12) with an adjustable
wrench
Remove the aerator and
check for debris.
Ensure that the rubber
washer is properly installed.
Rem
ove the cover button (16).
Lossen screw (15) with hex
wrench (17). Remove the
handle (14). Unscrew cap (13)
(by hand only). Tighten bonnet
nut (12) with an adjustable
wrench. Remove the cartridge
(11). Check for cracks
Apply additional silicone
sealant to the beveled side of
and test for leaks
hose connectors from water
supply lines. Clean the
washer in the water lines with
hot water, removing any debris
or calcium build up
8
Advertisement
Table of Contents
