Set Up - VTech Analogue Contemporary Series User Manual

Set up

Default settings are indicated by asterisks (*).
Setting
Handset earpiece volume
Ringer volume
Ringer tone
Voicemail voltage detection
Ringer tone
There are 3 ringer tone options.
To change the ringer tone
1. Turn the telephone base over with the
bottom side facing up. Remove the
mounting bracket if it is in desktop position.
To remove the mounting bracket, firmly
push both tabs downward and pull up until
they release from the grooves.
2. Slide the ringer tone switch to select the
desired detented position using a narrow
object such as a standard screwdriver.
3. Install the mounting bracket accordingly.
Options
1, 2*, 3, 4
Low, Medium*, High
Tone 1*, Tone 2, Tone 3
Disable voicemail voltage detection,
Periodic low voltage pulse detection
method, Steady high voltage and
periodic high voltage pulse detection
method
Flash
To change the flash duration
1. Remove the faceplate and overlay if they
2. Press FLASH and you hear 3 beeps. Then
EN - 9
Adjustable by
User and administrator
User and administrator
Adminstrator only
Adminstrator only
are on the telephone base. Lift the handset.
Then press the recessed PROGRAM key.
The MUTE key flashes when in administrator
mode.
press a dialing key, 1 (100ms), 2 (300ms) or 3
(600ms), to select the desired flash duration.
Press the recessed PROGRAM key again.
You hear 3 rising beeps as confirmation.